Pre-orders are ONLY FOR THE NON-MUTE VERSION 2.0.
Join the newsletter or follow us on Twitter for related updates-
- Cable is going to be a little shorter, 3m not 3.5m.
- Cable will be thicker 2.0mm compared to 1.7mm in current mic.
- The wire connection to the boom and 3.5mm jack will be over-molded with an elastomer for better durability and handling (3.5 jack).
- The boom will be thinner yet will have a slightly larger/stiffer steel spine in it.
- The boom will be slightly longer, by about 2 cm.
- The mic tip will be over-molded for increased durability (and it will look nicer, in my opinion).
- We will likely offer or include a foam windscreen for the tip.
- The plastic parts will use a better mold process and better plastic. The look will be more polished and the mechanics/fit will be more solid.
These above changes will hopefully be ready to go within 2 months.
We will have a mute button version coming soon after we get and are happy with the first run of the new revision 2 mics.
The button will be push on push off push on type and will be placed at the back of the boom opposite of the mic. It will be small/light-weight and should stand up to many clicks...
- Do you have any input on our chosen improvements? Changes may be able to be made if enough of you request them.
- NEWEST COMMENTS ARE AT THE TOP- so start from the bottom ... we're looking to improve this
Cheers!
Jimmy and Antlion Audio Staff